This guide is intended to walk you through how to set up Dexis's GxPicture driver software to run these sensors for compatibility with Dentiray Capture/XV Capture/Xrayvision. NOTE: Windows Professional Edition required.
***For GXS700/Dexis Platinum Sensors you will need the Correction Files provided by the manufacturer. They are included on a disc or flash drive that comes with the sensors. If you are a former Dexis Software user, they can often be located under C:\Program Files (x86)\Dexis\Flashdir. The Flashdir directory can be copied and renamed to GXS700_CorrectionFiles. If the corrections files cannot be located, the client will need to reach out to Dexis/Kavo to obtain them again.
1. Browse to https://dexis.com/en-eu/download-center and download "GxPicture (Web Installer)"
2. Extract and run the executable contained within the zipped folder
3. When the Dexis Software Manager appears, under Add Features, you need to download the following 3 items.
1. IO Sensor Driver for Dexis IXS
2. Legacy Driver 3.6.7 for GXS700
3. GxPicture
(These three items will start downloading automatically. If not you'll need to click download next to each one)
4. After downloading, install the IO Sensor Driver and Legacy Driver BEFORE installing GxPicture or the sensors will not be selectable during the GxPicture installation.
5. Install GxPicture
5a. When installing GxPicture Filters - Select Other Software - with Filters Enabled
5b. When selecting the devices - Select GXS700/Dexis Platinum and/or Dexis IXS/Dexis Titanium depending on if you are installing for one, the other, or both.
*If you do not see the sensor type you are installing for in the list, close the GxPicture setup, return to the Dexis Software Manager and ensure that the Sensor Drivers are installed first.
5c. When selecting which filters to install, your selection should match the previous selection, GXS700/Platinum, IXS/Titanium or both
5d. (For Platinum/GXS700 Sensors Only) - When GxPicture indicates it needs to reboot - Leave GxPicture open to that screen and then open File Explorer and copy the correction files for the GXS700/Platinum Sensors to C:\Program Files (x86)\Gendex\GXS700_CorrectionFiles. If this folder does not exist you will need to create it. The folder name must match exactly to "GXS700_CorrectionFiles".
6. Reboot the computer with GxPicture prompt to reboot. (This will also apply folder permissions to the corrections files folders which is why it's important to copy them before rebooting)
*The Dexis IXS / Dexis Titanium /Dexis Ti2 sensors will copy their own corrections files over AFTER the reboot once the sensor is connected via GxPicture. Do not unplug the sensor while the correction files are copying. There will be a progress bar on the screen.
7. After rebooting the computer, right click on the sensor icons in the system tray and select Image Settings. In the Image Settings window, select the optimizer to turn on the image optimizer for optimal quality images. This can be enabled for both GXS700/Platinum and IXS/Titanium sensor types.
Article Version 1.0 4/27/2026