Skip to main content

Integrating Clio Prime Sensor in Apteryx Online Capture

Tom Morgan
Updated

Overview

This guide covers integrating a Clio Prime sensor using TWAIN with Apteryx Online Capture.
 

Environment

Hardware: Clio Prime (TWAIN)

Software: Apteryx Online Capture

Resolution

NOTE: The Clio sensor's drivers should be installed prior to XVWeb setup by Clio support or the practice.  It is not the responsibility of Planet DDS Imaging Support to install these drivers.  Planet DDS will only install the required Apteryx plugins to connect to the installed drivers.

Apteryx Online Capture Setup

  1. Log into Apteryx XVWeb.
  2. If XVCapture is already installed, please close the application by right clicking on the flag icon and selecting Quit.
  3. Install Apteryx XVWeb Online Capture per Installing XVWeb Capture – Apteryx
  4. Select the TWAIN plugin and any other hardware plugins the practice needs connectivity for.
  5. Click Install after selecting all required plugins.
  6. Reload the Apteryx XVWeb page or log out and log back in.

 

Set Image Orientation

  1. In Apteryx XVWeb, click the User icon at the top right.
  2. Click Capture in the drop down.
  3. Click Device Settings.
  4. In the Devices dropdown, select the TWAIN – Clio Digital X-Ray Sensor.
  5. Change Wire side of the raw image to Top.
  6. Click Submit at the lower right side to save.

 

TWAIN rotation settings must be changed in Clio Connect or the INI file for the Clio Sensor Driver:

  1. If Clio Connect is running, right-click on the Clio Connect icon and select Client Settings.
  2. Change the Rotation Mode from 1 to 0

If Clio Connect is not installed, please contact the Clio support team for assistance with the install.  An alternative is to make the change directly to the INI file.

  1. Open C:\ClioSensor\ClioSensor.ini in Windows Notepad
  2. Find the section [TWAINClient]
  3. Find the line item Rotate=1
  4. Change it to Rotate=0
  5. Save the file.

 

 

Image Quality Settings

  1. Image quality for the Clio Prime sensor In Apteryx is controlled by TWAIN drivers and the calibration file provided by SOTA Clio.
  2. Clio Imaging should be contacted for any adjustments to the Filter Tuner.exe settings.

 

Article Version 1.1 11/4/2026

 

Related articles