Skip to main content

DigiDoc Blu sensor

Michael Satterfield
Updated

The DigiDoc Blu sensor can now be used within XVCapture via the latest version of the CCB TWAIN extension (CCB TWAIN 2.0.0), available on our downloads page: https://apteryximaging.planetdds.com/hc/en-us/articles/4412758829595-Current-Imaging-Downloads

Steps to install:

  • Download the CCB TWAIN 2.0.0 Installer and run it to install the extension and supporting files

  • Launch XVCapture

  • Go to Advanced User Tools > Preferences (password is AKRON) > Imaging Extensions > Digital x-ray image capture > CloudPluginBridge

  • Go to Hardware Settings and specify the directory to Apteryx.Plugins.Bridge folder (typically C:\Apteryx\XVCapture\Apteryx.Plugins.Bridge)

  • Go to Image Quality settings > Modify Post Capture Filters

  • Select Filter Options > Add New Filter > Rotate 90 degrees counter-clockwise filter, then click OK
    Click OK all the way back out to the main screen of XVCapture

Workflow: 

  • Plug sensor in, open XVCapture

  • Capture Images > Capture Images

  • Select "CloudPluginBridge" option

  • Select a layout

  • Start progression, pick TwainCapture from device selection, click activate

  • The digidoc interface will appear - select a template within the interface's "template" dropdown to match the progression being used within XVCapture

  • Click "capture" to begin the capture process

  • Capture all needed images within the TWAIN interface without backing out to XVCapture

  • Once finished, click "import all" - all images will import one by one into XVCapture's layout

  • Click Save once that finishes to store and forward the images

Note: If “TwainCapture” does not appear in the device selection list within the CCB TWAIN, check to verify the TWAIN is installed using irfan view or twacker. If the TWAIN does not appear there either, the client will need to reach out to DigiDoc to get the TWAIN and drivers installed.